MODEL |
SCC-MCU-100
|
SCC-MCU-200 |
| INPUT
|
| MPPT Range @ Operating Voltage |
15 V ~ 22 V @ 12 V |
30 V ~ 44 V @ 24 V |
| Maximum PV Array Open Circuit Voltage |
25 V |
50 V |
| Maximum PV Array Power |
100 W
|
200 W |
| Maxium Current |
6 A |
| OUTPUT |
| Nominal Battery Voltage |
12 V
|
24 V |
| Connected Battery Type |
Sealed lead acid battery |
| Maximum Charging Current |
10 A |
| Ripple Voltage |
< ¡Ó 1 V |
| Maximum Efficiency |
97% |
| Standby Power Consumption |
0 w |
| Charging Method |
Three stages: bulk, absorption, floating 1 / floating 2 |
| PROTECTION |
| Overload Protection |
> 110% shutdown and retry 10 times after 15 sec. |
| Output Shot Circuit Protection |
YES |
| Polarity Reversal Protection @ Solar Cell |
YES |
| Battery Temperature Compensation (Option) |
-3.3 mV/¢XC/cell |
| INDICATORS |
| LED Display |
Five indicators for solar, charging, load, and fault status |
| PHYSICAL |
| Dimension, D X W X H (mm) |
31 x 82 x 120 |
| Net Weight |
300 g |
| Connector |
Input/Output terminal block |
| Type of Mechanical Protection |
IP 43 |
| ENVIRONMENT |
| Humidity |
0 ~ 100% RH (No condensing) |
| Operating Temperature |
-20¢XC to 55¢XC |
| Storage Temperature |
-40¢XC to 75¢XC |
| Altitude |
0 ~ 3000 m |
| COMPLIANCE |
| Quality |
ISO9001/ISO14001 |
| EMC |
EN61000-6-1, EN651000-6-3 |
